Downriggers & Stacker Releases
Getting The Most From Lead Core Lines
Pro Modifications For In-Line Boards
Tips For Reading In-Line Planer Boards
Trolling The Big Easy Spotted Sea Trout Of Lake Pontchartrain
Few
anglers would argue the effectiveness of planer boards. In fact, many
would argue that planer boards are the most deadly lure delivery system
ever invented. Not only do planer boards enable anglers to fish multiple
lines and lures, the amount of water that can be quickly covered with a
planer system is second to none.
In
addition to straining water and offering multiple lines, planer board
fishing is also the best way to tempt strikes from wary species such as
brown trout, steelhead or heavily fished walleye. However, these sought
after species aren’t the only targets of planer board fishing. Hardly a
fish swims that doesn’t regularly fall prey to anglers using a planer
board system. Salmon, trout, walleye, steelhead, muskie, pike, bass and
even large panfish such as crappie and white bass are commonly taken with
the help of these trolling aids.
Planer
boards are effective and easy to use. To get the most from these trolling
aids, anglers must understand a few of the basics of planer board fishing.
Understanding
Dual Board Systems
Different
types of planer boards are designed for different fishing applications.
Anglers can choose from two types of planer boards. The most popular type
of planer board system are dual boards or what some anglers refer to as
mast systems.
A
dual board planer system includes a set of boards that feature two runners
attached parallel to one another. The Riviera Dual Planer Boards are
collapsible, making them easy to store even in small boats. These boards
also feature three tow point adjustments for different wave conditions and
a durable maintenance free design. A dual board system also requires a six
foot planer mast that mounts near the bow of the boat. A tow line/reel
system attaches to the mast and allows the planers to be easily deployed
and retrieved.
The
boards of this type of planer system are normally set to run 50- 100 feet
out to the side of the boat. In calm water the boards are set out the
furthest. Fishing lines are attached to a dual board system by using
specially designed spring loaded pinch pads. These pinch pads with the
fishing line secured between their jaws are then attached to the tow line
using a shower curtain hook. As the boat trolls forward, line is played
off the fishing reel allowing the line release and lure to work down the
tow line towards the planer board.
Commonly
called planer board releases, Off Shore Tackle is the worlds largest
manufacturer of planer board releases designed for all types of fishing
situations. The size of these line releases, pad diameters and tension
settings vary depending on
the size and type of fish to be targeted.
The
line release has two functions. First it must hold the line securely while
trolling at a variety of speeds and varying line diameters. Second this
fishing aid must release its grip on the line once a fish strikes.
Designing a release that masters these functions is no easy task. A
quality release provides enough tension to insure fish are solidly hooked
before the line slips free. It’s also essential that the release
function over and over again without damaging the fishing line.
Most
releases on the market either have too much tension, or not enough. Many
of these products abrade the line and few can withstand the tortures of
day to day fishing. It’s important to note that no single release is
universal to all types of fishing. That’s why Off Shore Tackle produces
a wide variety of line releases that are suitable for all trolling
applications.
When
targeting smaller species such as walleye, lighter tension releases are
employed. The OR-10 release is the best selling walleye release on the
market. The sliding spring allows the tension setting to be easily
adjusted as desired. When fishing in rougher water or for larger walleye,
the OR-14 release is the ideal choice. Like the OR-10, this release has a
sliding spring adjustment. The slightly heavier spring tension of this
release allows anglers to troll in rough water or at faster speeds without
false releases.
Larger
species such as trout or salmon require line releases with more spring
tension. The OR-3 was designed especially for anglers who target steelhead
, brown trout and trophy walleye. The larger pad diameter of this release
increases the friction on the line without having to significantly
increase spring tension. The amount of tension desired can be adjusted by
how deep the line is placed in the rubber pads.
The deeper the line is placed in the pads, the more tension it
requires to trigger the release.
The
OR-17 is similar to the OR-3 except the release has stronger spring
tension. Ideal for high speed trolling or when fishing in rough water or
when pulling large plugs, dodgers and other attractors, this product has
been an immediate success with salmon anglers. For muskie anglers, the
OR-30 is the most requested planer board release.
This release is similar to the OR-3 and the OR-17 but it has the
heaviest spring tension available.
Also
available is the OR-19, a small release with a very strong spring tension.
Popular with charter captains who prefer a release with extra tension, the
OR-19 insures positive hooksets and the maximum number of landed fish.
Often when a fish strikes a lure attached to the OR- 19, the line
doesn’t pop free of the rubber pads. The angler however can easily
trigger the release by simply snapping the rod tip quickly toward the
release. Triggering the releases as desired helps charter captains manage
lines and reduce tangles better when two or three fish may be hooked at
the same time. Matching line
releases to the target species insures that anglers will enjoy the best
possible success.
Dual
board systems can be used on virtually any boat and for any species. The
primary advantage of this type of planer board system can’t be disputed.
Once a fish strikes and the line is popped free from the release, the
angler is free to fight the fish. This
convenience is the primary reason so many dual board systems are currently
in use.
Dual
boards also have the advantage of being able to deploy large numbers of
lines. Many anglers fish up to five lines per side with the help of dual
boards. Anglers who are often faced with rough water also favor dual
boards. The larger board size helps this planer system plow through rough
water when fishing both with and against the waves. The versatility of the
dual board system is a major reason why so many anglers swear by them.
Why
In-Line Boards?
In-line
boards such as the Off Shore Tackle OR-12 Side Planer have seen
significant increases in sales in recent years. Price is one of the major
reasons these small boards have caught on so quickly. For less than $50.00
a pair an angler can get started planer board fishing. Compared to dual
board systems, in-line boards are less expensive. In-line boards also have
some other unique features that has helped them carve out a significant
niche in the planer board market.
Because
in-line boards attach directly to the fishing line, the board becomes a
strike indicator that makes it easy and fun to tell when a fish has been
hooked. The weight of a struggling fish causes the board to surge and sag
backward in the water. When two or more of these boards are being fished
side-by-side its especially easy to tell when a fish has been hooked.
When
a fish strikes and is hooked, the board and fish are reeled in together.
Depending on how the board is attached to the fishing line, the
angler can either reel in the board and quickly remove it, or release the
board and allow it to slide down the line while fighting the fish. We’ll
get in more detail on how to rig in-line boards in another feature.
Walleye
anglers are some of the most devoted in-line board users, but these
smaller sized boards can be used effectively on any species of fish. The
important thing to know about in-line boards is not all are created equal.
A good in-line board should be large enough to support the weight
and drag of common trolling tackle such as deep diving crankbaits, snap
weights, lead core line, attractors and other gear. Many boards simply
aren’t big enough to get the job done.
An
in-line board should also be ballasted properly. The OR-12 Side Planer is
carefully weighted so the board rides nose high and always rights itself
in the water. Boards that aren’t ballasted correctly tend to dive in
rough water causing all sorts of problems.
Because
in-line boards are small, they can be tough to see on the water. The OR-12
features a bright red flag that contrasts with the yellow board, making
them easy for other anglers in the area to spot. The OR-12 is also
versatile enough to be rigged in a number of ways suitable for walleye,
salmon, trout and a wealth of other species.
We
all know that planer boards are the fast track to better fishing success.
If you’re new to fishing, a set of in-line boards is a great way to test
the waters and see for yourself how effective planer fishing can be. If
you’re serious about fishing
big water and big fish, a dual board system is an investment you’ll
never regret. Here’s to more and bigger fish.
Anglers
don’t agree on much. It seems everyone who owns a fishing rod has some
strong opinions on what works on the water and what doesn’t. One of the
few topics that anglers do agree upon is the use of planer boards.
Everyone acknowledges that using planer boards can help anglers catch more and
bigger
fish.
With
that stated, the question becomes which of the two common types of
planer boards works best, dual planer boards or in-line planer boards? The
debate over these two uniquely different planer board types has confused
countless anglers.
Both types of planer boards are effective, but that’s not to say that
each
board type doesn’t enjoy a niche in the trolling scene. Among those who
troll
with boards often the ranks are about equally split between big and small
boards. One fraternity believes that dual size boards are the planer board
workhorses. The other faction argues that in-line boards are easier to
use.
As is often the case in a debate, both sides of the issue typically put
forth a good argument. The truth is, both dual board and in-line size
boards
accomplish similar functions. The primary purpose of planer boards is to
spread out trolling lines in order to contact more fish. Beyond this
primary
function the use of dual boards or in-line boards is largely a personal
choice. There are times however, when one type of planer board has
advantages over the other.
DUAL
PLANER BOARDS
Full
sized boards such as the popular Riviera Dual Planer Board have their
roots in big water. Designed to be used on open water and with larger
sized fishing boats, there is little doubt that dual boards have the edge
when fishing rough water. The Riviera DPB has a wider board spacing to
make it more stable and the ballast of the board has been changed to cause
the nose to ride a little
higher in the water. Collectively these subtle changes have transformed an
excellent planer board into one all others will be compared to.
The
large size of dual boards enables then to plow through bumpy seas when
trolling both with and against the waves. Trollers who spend much of
their time quartering seas or trolling into the waves will find that dual
boards are superior compared to in-line size boards. Dual boards also
have the clear advantage regarding the number of lines that can be fished
per side. With a dual board system its common for anglers to fish four,
five or even six lines per side!
If
you’ve got a big boat and frequently fish with four to six anglers
aboard,
dual planer boards are the easiest way to deploy the maximum number of
lines. Dual boards are also the obvious choice for fishing situations that
involve deep
diving crankbaits, Snap Weights, lead core line, gang spinners (aka
cowbells), dodgers and other trolling hardware that are heavy or that pull
exceptionally hard in the water.
For
all the advantages dual boards poses, in-line boards are equally handy.
Handy is the right word, because in-line boards such as the Off Shore
Tackle Side Planer are easier to use than dual boards. Simply set your
lure the desired distance behind the boat, clip on the Side Planer, let
out more line until the board is the desired distance from the boat, put
the rod in the holder and troll. When
a fish is hooked, the Side Planer and fish are reeled in together, you
remove the board from the line and the fight continues. This straight
forward style of board trolling is easy to learn and fun. In addition to
being user friendly, in-line boards are less expensive.
In
addition to being less expensive, in-line boards have some other subtle
advantages. In-line boards ride the waves in a different way than dual
boards. Smaller in-line boards tend to jerk around in the swells while
imparting a unique start-and-stop action to the lures. Many veteran
trollers feel that in-line boards trigger more strikes than dual board
systems that produce a more uniform trolling action. In-line boards also
have the advantage of maintaining steady tension against the fish during
the entire fight. When a fish strikes a lure trolled on a dual board
system, the line is pulled free from a release. For a few seconds slack
line exists until the boat catches up to the fish and the line is pulled
tight again. These few seconds of slack line are often enough to allow a fish that’s
not hooked securely to escape. With an in-line board hooked fish pull
against
the resistance of the board. The angler keeps tension on the fish by
reeling the board and fish in together. So long as the boat is kept moving
forward slowly, there’s constant tension on the fish. In-line boards
work so well that few hooked fish escape. This is one of the primary
reasons professional tournament anglers favor in-line boards.
Both
dual boards and in-line boards have their advantages and disadvantages.
Choosing one type of planer board over another boils down to how and where
the boards will be used. On big open water where big boats rule, the dual
board system is the king of planer boards. Anglers who fish from smaller
boats and often frequent a wealth of different water types, in-line boards
are both functional and practical. While the choice is personal, the fact
is you can’t make a bad decision. Both dual boards and in-line boards
are efficient and exciting ways to fish. Take your pick and get involved
in the excitement of planer board fishing.
Downriggers
& Stacker Releases - Don't Use One Without the Other
Even the best downrigger can be made better. A simple device known as
the
OR-2 Medium Tension Stacker Release makes any downrigger twice as
effective. Stackers are
designed to allow two fishing rods/lines to be used with one downrigger.
The OR-2 and its cousin, the OR-7 Light Tension Stacker Release are both
designed to double your fishing fun. A pair of pinch pad style Off Shore
Tackle releases are connected together using two lengths of coated
steel wire. The top release is mounted to a slightly shorter length of
wire than the bottom release and both releases are held together with a
heavy duty cross-lok snap.
Rigging
a downrigger to fish two rods is easy. Start with a trolling rod armed
with a favorite spoon or other lure. Let this bait back behind the
boat the desired distance. Grasp the line between your fingers and pinch
open the single downrigger release attached to the cannonball with your
other hand. Place the line into the release near the back of the rubber
pads and allow it to close on the line.
With
the first line securely held in the single downrigger release, lower the
cannonball approximately 10 feet below the surface. Grab a second rod and
let out another lure behind the boat. It's best to keep the lead on this
second rod
rather short. Normally a trolling lead of 10-15 feet works best with a
stacker set up.
Open
the cross-lok on the stacker and clip it closed around the downrigger
cable. Grasp the stacker release that's on the longer lead
and place the fishing line near the back of the rubber pads. Next grasp
the release on the shorter lead and pinch it onto the downrigger
cable above the cross-lok snap. The release on the shorter lead
simply holds the stacked line at the desired position along the downrigger
cable. Stackers can be set at different locations along the downrigger
cable depending on how the angler wants to space out trolling lines.
When
the cannonball is lowered, the stacker release remains attached to the
downrigger cable. Stackers are an easy way to fish two rods on a single
downrigger. Stackers also make it possible to cover more water with
additional lures and depth selections.
Off
Shore Tackle produces the OR-2 Medium Tension Stacker Release for
trout , salmon, muskie and other large fish and the OR-7 Light Tension
Stacker Release for walleye and other small to medium size fish.
NOTE:
When using Off Shore Tackle stackers, it's important to always
attach the short lead on the stacker to the downrigger cable.
Position the short lead above the cross-lok snap and you'll enjoy trouble
free use and longer service from these excellent stackers.
Fishing
Add-A-Lines
Downrigger fishing is a wonderful thing, but
don't stop short of
perfection. Anyone who fishes downriggers should go the extra step to fish
one extra lure per line. Most anglers make their own rigs for this purpose
known as sliders. A slider is made by simply taking six feet of fishing
line and attaching a snap swivel to both ends. One end of the slider rig
is slipped over the fishing line and closed, while the second is attached
to a favorite spoon or body bait. The slider rig is then tossed into the
water and the lure allowed to gradually work its way down the main line.
The slider eventually ends up positioned on the main line somewhere
between the surface and the downrigger weight.
Adding
a second lure to a downrigger line is always a good idea, but it¹s
impossible to tell exactly where on the line the slider is fishing. The
slider slips down the main line, but at which point it stops depends on
trolling speed, how deep the downrigger weight is set and the lure itself
used on the slider. Because
of these variables it's nearly impossible to duplicate results using
sliders.
Another
problem an angler runs into when using sliders is when a fish strikes the
lure attached to the slider, there is no tension or resistance against the
fish. As the fish swims away, the slider rig simply slides up or down the
main line. The angler can't set the hook until the line is popped free
from the release at the downrigger weight and all the slack line in
between is reeled up. The time it takes to do all this is plenty for the
fish to determine something is wrong and drop the bait. Unfortunately,
sliders generate lots of strikes but few hooked and landed fish.
USING
ADD-A-LINES
An
Add-A-Line is similar to a slider, but the rig is fixed at the desired
point along the fishing line using a small pinch pad style line release.
Depending upon the target fish, one of several Off Shore Tackle planer
board releases is perfect for rigging an Add-A-Line.
Rigging
an Add-A-Line is easy. Take six feet of quality monofilament line and
attach a ball bearing swivel to both ends. Next take an OR-14 (for
walleye) or OR-19 (for trout/salmon) planer board release and install the
split ring provided in the package to the back of the release. Once the
split ring is in place, take a third snap swivel and thread it also onto
the split ring. Select the lure to be attached to the Add-A-Line and clip
it in place on the snap swivel opposite the release. The Add-A-Line is now
ready to set.
An
Add-A-Line should be set at least 10 feet above the point where the main
line is attached to the downrigger weight. Once the main line is secured
into the downrigger release and the downrigger weight lowered at least 10
feet, take the release on the Add-A-Line and pinch it over the downrigger
cable. Fixed in this position the Add-A-Line will be lowered or raised as
the downrigger weight is moved. The rig is completed by taking the snap
swivel attached to the split ring and clipping it over the main fishing
line. This step connects the Add-A-Line to the main fishing line.
The
downrigger weight is then lowered to the desired fishing depth and the
Add-A-Line goes along for the ride. Because the angler chooses at which
depth to set the Add-A-Line, it's easy to duplicate the rig when fish are
hooked and landed.
The
resistance provided by the release attached to the downrigger cable is
enough to insure that fish which strike are hooked solidly enough that
they can¹t shake the lure. The struggling fish quickly pops the release
free of the downrigger cable.
Meanwhile the jabbing rod tip at the surface tips off the angler to pop
the main line free of the downrigger release. The angler must then reel as
quickly as possible to pick up the slack line.
Add-A-Lines
are an essential part of downrigger fishing. These simple rigs are
effective on walleye, salmon, trout, steelhead, striper and just about
everything else that swims.
Getting
The Most From Lead Core Lines
History repeats itself. If you hang around anglers long enough
you're
bound to hear about the latest techniques. Often these new techniques are
simply new twists on methods popularized decades ago.
A
few decades ago, lead core line was a hot new trolling method for reaching
deepwater trout and salmon. Lead core is a soft lead wire with a tough
dacron coating. Like monofilament, lead core comes in different break
strengths. The size/weight of the wire used increases as the break
strength increases. Common lead core sizes include 15, 18, 27 and 36 pound
test. Walleye anglers favor 18 or 27 pound test, while salmon anglers
prefer 27 or 36 pound test lead core.
Weighted
lines are fished by controlling the trolling speed and the amount of line
let out. To achieve greater depths anglers let out more line and slow down
their trolling speeds.
Lead
core was just beginning to enjoy popularity when downriggers and diving
planers hit the market. The interest in lead core line soon declined.
In
the last few years both walleye and salmon anglers have rediscovered the
value of trolling lead core line. It began with a few charter captains and
tournament anglers who started experimenting with lead lines fished
straight out behind the boat. Salmon captains used as much as 100-200
meters (one or two cores) of lead core line connected to a 20-30 foot
leader of 20 pound test monofilament. This ultra long line trolling method
turned out to be just the ticket for boat shy salmon and steelhead.
Recently
the rebirth of lead core line has taken on a new twist.
Adding planer boards helps to gain more outward trolling coverage
and allows anglers to run multiple lead core lines at the same time.
Combined with boards, lead core is an effective way to get down and out to
the side.
Lead
core can be fished with both in-line and dual boards. However, not every in-line board is up to the challenge of
pulling 200 meters of lead line.
Larger
in-line boards like the OR-12 Side Planer are needed to handle this long
lining method. Lesser boards simply can¹t deliver the outward coverage
serious anglers are looking for.
Riviera's
Dual Planer Boards are also ideal for fishing lead lines.
With this board set-up several lead lines can be run off each side
of the boat.
RIGGING
IN-LINE BOARDS FOR LEAD CORE
The
standard planer board releases made for in-line boards are not designed to
function with lead core lines. Specialty releases such as the OR-18
Snapper Release feature wider jaws and larger pinch pads that are better
suited to holding lead core line. Mount the OR-18 to the tow arm of the
Side Planer with the hardware provided.
When
setting lines, let out the desired amount of lead core and then flip open
the OR-18 Snapper on the tow arm of the Side Planer. Place the lead core
as far back in the release as possible and close the cam action release.
Rigged in this manner the Side Planer will stay put on the line at the
point it was attached.
Once
the board is attached to the lead core, more line is played out until the
board reaches the desired distance away from the boat. When a fish is
hooked, the board and fish are reeled in together, the board quickly
removed from the line and the fight continues.
To
reach the maximum depths with lead core line some anglers spool on 100-150
yards of 30 pound test super braid or dacron backing before adding the
lead core line. A surgeon or blood knot is a good way to connect the
backing to the lead core line. A 20-30 foot leader of premium 20 pound
monofilament is added at the terminal end.
When
fishing lead core line with backing, let out all the leader and lead line
until the backing reaches the tip of the rod. A line counter reel is the
most handy way to keep track of how much backing is let out. The more backing that¹s let out the deeper the lead core will
run.
When
the desired amount of backing has been let out, it's time to attach the
Side Planer. The OR-18 Snapper Release is ideal for attaching the backing
material to the Side Planer. The adjustable cam action of this release
grips even super braid lines securely, preventing the line from pulling
free of the release. Once the board is attached to the backing, play out
additional line until the board is 25-50 feet out to the side of the boat.
When a fish is hooked, the board is reeled in and removed from the
line before continuing the fight.
FISHING
LEAD CORE ON DUAL BOARDS
Traditional
dual board mast systems can also be used to fish lead core line, but some
simple modifications are needed. To rig up for dual boards, begin by
spooling 100-150 yards of 20-25 pound test monofilament onto a large
capacity trolling reel. Monofilament backing is needed to function in the
line releases incorporated with this trolling system. To this
backing add 50 to 100 meters of lead core line and 20-30 feet of premium
20 pound test monofilament as a leader.
Set
lines by letting out all the leader and lead core line. The running depth
is controlled by how much backing is let out. Once the desired amount of
backing is let out, grasp the monofilament backing in one hand and an
OR-17 Medium Tension Planer Board Release in the other.
Pinch open the release and place the backing as far back in the
release as possible. Close the release and open the shower curtain hook
that comes standard with this release. Place the tow line from the mast
system inside the shower curtain hook and close it. Now as more line is
played off the reel the lead core will work its way out to the side. Two
or three lead lines can easily be run per side of the boat using this
method.
When
a fish strikes, the backing will be pulled free of the OR-17 release and
the angler is free to fight the fish. If more tension is desired, an OR-19
Heavy Tension Release can be substituted for the OR-17.
The
OR-17 release works best when using 50-75 meters of lead core line. If
longer lengths of lead core are used, the heavier tension of the OR-19 is
required.
TIPS
TO REMEMBER
Lead
core line is a speed dependent trolling system. The depth lures fished on
lead lines run at is controlled by how fast the boat is trolling and by
how much total lead is played out. Experiment with different speeds
and lengths of lead core until a productive combination emerges.
The
super long leads used when fishing lead core make it impossible to turn
sharply. Wide, slow turns are required when fishing lead lines to avoid
tangles. Also it¹s a good idea to keep well away from other boats that
could accidentally foul these lines.
Incorporating
the help of Off Shore Tackle Side Planers and Riviera Dual Planer
Boards, makes fishing lead lines even more versatile. This old favorite is
becoming one of the hottest new trolling techniques for trout, salmon,
steelhead and walleye.
Lead
Core & Snap Weights
Every troller needs a little help now and then. Lead core line is a great way to reach deep water trout, salmon, stripers and even walleye. Lead lines are enjoying renewed popularity among salmon anglers who feel the extra long leads used with lead core help to target boat shy fish. It¹s hard to argue with success. Countless fish are being caught with the help of lead core line.
The
problem with lead core is sometimes these weighted fishing lines don't
fish deep enough. Like any trolling weight or weighted line, the depth
lead
core line will run depends on lead length and boat speed.
The more lead line that's let out, the deeper it will fish. Also,
the slower the boat is trolled, the deeper the lead core will fish.
Theoretically lead core line could be used to reach just about any depth
desired, assuming you¹re willing to let out several hundred yards of lead
core line or troll at ultra slow speeds.
It's
not practical to troll at these slow speeds or to use ultra long lengths
of lead core line unless you use Snap Weights. Adding these handy in-line
weights to lead core line is easy. Even better, clipping on a Snap Weight
makes fishing lead core line more versatile and effective.
To
increase the running depth of lead core line, simply let out the desired
amount of lead line, then place a Snap Weight on the lead core line or the
backing material. The point where the lead core and backing join is a
logical place to attach a Snap Weight. A good rule of thumb to follow is
each ounce of weight added will increase the running depth approximately
five feet.
When
a fish is hooked, the Snap Weight is reeled in along with the fish.
When the Snap Weight reaches the rod tip, it only takes seconds to
remove it before continuing the fight. Slick!
An
Off Shore Tackle Snap Weight kit comes complete with four OR-16 Snap
Weight Clips and an assortment of weights from 1/2 to 3 ounces. Additional
clips
and heavier weights can be purchased separately.
Snap
Weights are an easy way to get more depth from lead core. This simple
trick is also a great way to avoid those ultra long leads so common with
lead line. After all, who wants to reel in a fish from 600 feet away?
Live
Bait Stripers By Bruce DeShano
Landlocked Stripers are another fish that can be
easily taken with planer boards. Recently,
live bait has been the chosen method of guides and running live shad off
the Off Shore Side Planer makes it easy.
You use the OR-14 and pigtail method to attach the live bait to the
board because the striper is such a hard fighter you don’t want to take
the board off when landing the fish.
To make things easier, you put a speed bead or Snap Weight about 4
feet ahead of the hook. Now
when you release the board it slides down to this position and you can net
the fish with the board on the line.
There is no closed season in Kentucky for striper
and they fish year around for them. The
average fish is 8 to 14 pounds with 40 pound monsters being caught every
year. Good eating and hard
fighting, they make a nice winter break to fish for.
Nancy Guide Service on Lake Cumberland has perfected
the live shad method of striper fishing. Tim Tarter and his many guides are experts at finding and
catching striper on this huge lake. I
highly recommend you take a trip with them and learn the finer points of
live bait fishing for striper from these fine guides. Visit their website for up to the minute fishing
reports at www.fishin.com.
Also, I like to stay at the Lake Pointe Lodge
located in Russell County while I am there.
Personal, friendly service, clean and affordable, it makes a nice
vacation spot in the hills near Lake Cumberland. Larry Gillock has both motel and efficiency units and you can
contact him at (270) 866-3856. The
area is rich in history and their chamber has a nice brochure of things to
do while you’re there when you aren’t fishing.
Their number is (888) 833-4220.
Pro
Modifications For In-Line Boards
There are many ways to rig the Off Shore Side Planer
Board. Almost every pro and
every guide has a twist on the way they run their boards and that is what
confuses many anglers new to the side planer game.
Right from the package, the boards will fit most
normal fishing situations, in lakes that do not have large waves or for
normal size lures they are fine and are used that way often. Put the flag up whenever your fishing with the side planer.
It makes it easier to see, read and find if you happen to have it
fall off the line.
Now for some of the Pro modifications:
BIG WATER WALLEYE AND SALMON
OPTION 1. Use
an OR-16 on the black tow arm and on the back split ring.
OPTION 2. Use
an OR-18 on the tow arm and an OR-16 on the back split ring.
OPTION 3. Use
an OR-18 only on the tow arm and do not use any release on
the back. This will
let the board surf on the water with a fish.
OPTION 4. Use
an OR-14 or OR-19 on the tow arm and an OR-16 on the back split ring. Now
you pop the front release when a fish is on, the board will flip around. Let
the fish pull it back out of the spread and then fight the fish to the boat.
When the board is close enough, remove it and finish landing the fish.
Use the OR-14 release in calm waters and the OR-19 when it is rough.
OPTION 5. Using
the slide back method is when you put a snap swivel or a
product we sell called the corkscrew on back split ring and either
an OR-14 or OR-19 on the tow bracket.
Now when a fish hits, it releases the tow release and slides down to a Speed-Bead or other stopper you have placed on the line ahead of the lure.
You do not want the board to go all the way to the lure.
SMALLER FISH AND LIGHT BITING FISH.
Use the tattle flag for slow presentations and where you might have
problems with small fish and weeds in the water.
Adjust the flag so it is just leaning back about 15 degrees when
the lure is pulling on the board. Now
if the flag goes back more or comes up straight, you know you have
something wrong with the lure.
Place both releases on the bracket with the supplied extra screw
and nut. This makes the board
more sensitive to anything pulling on it from the lure.
STRIPERS
Most of the Striper guides use the OR-14 release on the tow arm and
a corkscrew or snap swivel on the back.
Since they are usually fishing calm water, they often do not put
the flag up. The downfall of
this is that if a line breaks, the board is difficult to see on the water.
Pursuing
Big Lake Fish By Captain Jim J Karr, Therapy Too Charters
The ever-changing eco-system of the Great Lakes has
made fishing more challenging than ever before. The advent of cleaner,
clearer water due to the zebra-mussel invasion has changed big lake
fishing forever. Remember, downrigger fishing was created on the Great
Lakes, we figured out how to optimize our presentation and it worked for
over 30 years, but it’s not as productive as it once was. We’re
putting more rod holders on boats to accommodate those specialty rods
we’re adding to our arsenals in our pursuit for those big-lake fish.
The fish talk on the radio
isn’t “How deep, what flavor lure?” anymore. The talk is “How much
lead core (half, full, core & half, two core, or how many colors, and
any clip weight), down the chute, out the side or on a in-line-planer
board?” Diver programs have changed too. What type of line;
monofilament, spectra, or wire and ring size from no ring to standard,
large, super, jumbo size, and super jumbo also are you running clip
weights.”
These rods are not just an
addition to the presentation anymore but go way beyond the reach of what
downriggers can do. These innovated ways to get farther back, off to the
side and down and out and still maintain control of what we put out have
set the stage for more “fish on” again.
Lead core line is simply
abrasion resistant braided nylon over an inner core of lead, which insures
quick sinking of the line. Specially dyed colors change every 10 yards for
metering of line length so you don’t need a line counter reel. It is
available in different test from 14# to 60# but don’t think the higher
the test the deeper the line will sink. For example, the 27# test (most
popular) and the 36# test have the same size lead core only the braided
nylon has been increased for strength, which makes the diameter large so
the line will not sink as deep. Lead core is much bigger in diameter so it
requires reels with larger capacity than ones used for your riggers when
you install a core (10 colors) or more on a reel. Typical setup is a 50’
leader of 20# fluorocarbon, 27# lead core, and 30# spectra or monofilament
backing. The smaller diameter of spectra braid line makes room for a half
core (5 colors) to be put on the same reel used for the downrigger and
still have plenty of backing. This works on diver reels too, as you can
get up to a core-&-half (15 colors) on these.
KEEP IT IN THE WATER
Lead core does not have
the resilience that other lines do and needs to be treated properly. You
must put the entire core in the water, which has a dampening affect on the
line, to prevent breakage. It simply can’t take the back and forth or
“snap action” created from wave and boat movement like other lines
can. Example: if you’re using a full core (10 colors) and your half core
(5 colors) is having all the action, you can’t just reel up half the
line-it will eventually break and you will be looking to retrieve your
in-line planer board. Because of this fact, lead core fishing requires
different rod setups for the various lengths being used. As a minimum,
having just two rods of each setup requires a lot of equipment. So having
reels with different combinations all set to make the change–over is the
way to go. I’ll run two to four setups on each side of the boat,
depending on the fish action, and that requires in-line planers, all to
reach out to those boat-shy fish.
TIE ON THE CORE
To tie a leader or backer
line to lead core, just pinch the lead off inside the lead core line about
six inches from the end; remove the core, then tie a blood knot and apply
a little crazy glue to finish it off. If you’re running in-line rods
like I do, you need to use a smaller knot so it passes through the rod
tip. Simply pinch off about an inch of lead core in the braided nylon and
remove it, make a loose overhand knot in the line just back from where the
core has been removed. Now take the leader or backer line and insert it
into the center where the core was until it butts the remaining core.
Pinch both lines while moving the overhand knot to where the line is
inside of the other, and then tighten the knot, that’s it! I use the
scissors on my pocketknife to cut the core, leader, and backer to make
sure the ends are free of burrs. Spectra line is small in diameter and
limp so you first need to glue about two inches of line to make it stiff
so it can be inserted inside the braided nylon.
Each colored segment takes
the lead core down about 2 to 3 feet, depending on boat speed, type of
lure used, and amount of current present. You can develop a pattern as to
distance back and down just as we have with downriggers. The use of
in-line planers is needed to develop these patterns with lines more than
the length of two football fields trailing behind. It’s risky to even
fish this way when there is much boat traffic; it’s difficult to turn
and keep other boats from crossing over your lines that far back.
CORE AND SNAP WEIGHTS
I use a Snap Weight on the
OR-16 clip to assist in getting the lead core down quicker and shorten up
the distance behind the in-line planer boards to obtain the same depth.
For example: 3 oz. is down 18 feet, 8 oz. is down 22 feet when added to a
half core. With a full core 3 oz. takes it down to 31 feet, while 8 oz.
take it down to 36 feet; with a core & a half add the same weight and
you’re at 47 feet and 62 feet respectively.
NO LEAD CORE
A half core with a 50’
leader puts you 200 feet back behind the in-line planer board. The same
distance back with a combination of spectra line and Snap Weights on an
OR-16 clip will surprise you! The 3 oz. takes it down 10 feet (same as a
half core), 6 oz. is down 18 feet (same as half core with a 3 oz. weight),
and 8 oz. is down 30 feet (same as a full core) that is 150 feet shorter
than the full core distance. That gives you more control and enhances your
maneuverability when using multiple in-line planers.
I quit using double core
completely and use Snap Weights on the OR-16 clips, which has reduced the
need for all the different rod and reel combos too. What is unique about
the OR-16 Snap Weight Clip is it has a pin protruding through the center
of the pinch pad that prevents it from releasing the line even if it did
slip.
SETTING UP THE BOARD
When setting up in-line planer to use spectra line,
install an OR-16 at the rear of the board and move the spring forward to
the tightest setting, this allows the board to just lay back and not move
down the line if it releases while fighting a big fish. On the front end
install an OR-19 release again moving the adjustment forward to tightest
setting, and then install the second release, an OR-14 in the middle. To
install the planer on the line, clip the OR-16 on the line making sure the
line is placed behind the pin protruding through the center of its pads,
then place the line between the pinch pads of the OR-19 release, loop the
line around and run it between the pads a second time and snug it tight,
insert the line that’s between the front release and the rear clip into
the OR-14 release in the middle. This “super pro method” of rigging
the OR-12 board will surprise you even in rough water.
With spectra line on all my specialty rods, either
as the main or backer, my in-line rods make working with these type super
lines a lot more enjoyable as there are no guides for the line to wrap
around - but it does requires the use of smaller knots to pass through the
rods. When not using in-line rods, just splice in an 18” piece of 30#
test monofilament between the lead core and backer line, then just fasten
each clip to the larger diameter monofilament.
TAKE CARE OF THE CORE
The nylon cover over the
lead core does not have the abrasion resistance like monofilament or
spectra type lines do. So always fasten the clips to the leader or the
backing. Place Snap Weights on the leader right after the knot and fasten
the planer board in the same place on the backer. This allows you to be
more accurate with your presentation and obtaining your target depth. The
other advantage is you know where to check the line for abrasions. When
using just spectra line and the OR-16, you need to mark the line at the
different locations where you install the OR-16 and the in-line planer
board; this way, a line counter reel isn’t required.
The use of Snap Weights
and in-line planer boards with the OR-16 clip is the most universal
equipment on my boat and I know it will be yours, too, if you give it a
try.
Captain Jim Karr of
Therapy Too Charters can be contacted at 800-845-6095 or by visiting his
website at www.therapytoo.com .
Ever since Snap Weight in-line trolling weights were introduced a few
years
ago, anglers have been saying, “Why didn't I think of that”? Simple,
effective
and easy to use, Snap Weights should be a part of every trollers bag of
tricks. Unlike traditional trolling weights that must be permanently
attached to the fishing line, Snap Weights can be put on and taken off a
fishing line in seconds. There is no need to cut and retie, the weight can
be attached at any point along the fishing line and these trolling aids
work
great on all common types of fishing line.
The
Off Shore Tackle OR-16 Snap Weight Clip is the secret to this amazing
trolling system. Similar to a pinch pad style planer board release, the
OR-16 features extra heavy spring tension to insure that the Snap Weight
Clip and attached weight stays put on the line. A small pin protruding
through the center of the rubber pinch pads further guarantees the line
can't pop free of this clip. Simply pinch open the jaws of the OR-16 and
place the fishing line behind the pin. Select a desired weight size and
thread it onto the split ring located on the OR-16 Clip.
It's that easy to add Snap Weights to your trolling lines.
The
OR-20 Snap Weight Kit contains four OR-16’s and an assortment of weights
ranging from 1/2 to 3 ounces. Larger weights and additional OR-16 clips
can be purchased separately. Snap Weights are a great way to increase the
running depth of spoons, crankbaits, spinners and a wealth of other
hardware. The fishing depth is controlled by how much weight is added,
trolling speed and
also by the trolling leads selected. Snap Weights can be used to present
just about any trolling lure at all common fishing depths. From just below
the surface to salmon depths, Snap Weights fill an important niche in the
trolling scene.
These
unique in-line weights are designed to stay on the line while trolling and
fighting hooked fish. The angler simply fights the fish as normal and
removes the Snap Weight as it nears the rod tip. It only takes a split
second to remove a Snap Weight from the line.
Some
anglers like noted fishing expert and author Ken Darwin use up to 16
ounces when fishing Snap Weights for salmon and trout. "Snap Weights
have become my bread and butter salmon system," says Darwin. "My
basic salmon setup includes a standard sized Silver Streak or Michigan
Stinger spoon set 50
feet behind the boat. I clip a 12-16 ounce Snap Weight onto the line near
the rod tip and zero out the counter on the reel. Next I check my graph
for
fish marks and then let out enough line to present my spoon just above the
fish. These heavy Snap Weights run at a sharp angle behind the boat,
making
it fairly easy to predict the running depth of the trailing lures."
Unlike
downriggers and other traditional deep water trolling methods, Snap
Weights can be rigged and deployed quickly. It only takes a few seconds to
rig and set a Snap Weight. Weight sizes, lead lengths and lures can also
be changed quickly. Darwin recommends that anglers using heavy Snap
Weights incorporate 10 foot diver rods into their trolling program.
"The longer diver rods are better equipped to handle the heavy Snap
Weights and they also increase the overall trolling coverage,"
explains Darwin. "I typically run two long diver
rods out each side of the boat and two shorter heavy action downrigger
rods
off the corners."
SNAP
WEIGHTS BOARDS & THE 50/50 SYSTEM
Heavy
Snap Weights are a great way to target salmon or trout found 40-60 feet
below the surface. For fish located higher in the water column a different
Snap Weight program is in order. Steelhead, walleye, brown trout and other
fish that
are often found within 20 feet of the surface are prime targets for Snap
Weights combined with planer boards. Weights ranging from 1/2 to 2 ounces
are ideal for fishing the upper water column.
Select
a favorite crankbait, spoon or spinner and set it behind the boat 50 feet.
Clip on a Snap Weight and let out an additional 50 feet of line. At this
point the Snap Weight rig can be fished behind a dual planer board system
or an in-line board such as the OR-12 Side Planer. Anglers using dual
boards and Snap Weights for walleye will find the OR-14 Medium Tension
Planer Board Release is ideal.
Salmon
and steelhead anglers favor the larger pads, increased tension and
better hook setting powers of the OR-17 Planer Board Release. Those
anglers
who prefer in-line boards will find the OR-12 Side Planer is up to the
task.
Larger and more buoyant than other in-line boards, the Side Planer easily
handles Snap Weights, diving crankbaits and other hardware that would sink
lesser boards.
BEYOND
THE 50/50 SYSTEM
The
50/50 system is a great starting point for anyone who fishes Snap Weights.
Keeping the lead lengths standard and simply switching weight sizes to
achieve the desired depth is an approach that¹s easy to understand and
easy to communicate to other anglers.
Think
of the 50/50 system as a convenient starting point. It's important to
note that Snap Weights can be fished on any combination of lead lengths,
making them amazingly versatile. Remember, the lead length combinations
used aren't as important as simply knowing which combinations are productive
on
any given day. Don't forget to monitor your lead lengths with a line
counter
reel so productive leads and Snap Weight sizes can be duplicated as
needed. From steelhead that are often found near the surface to walleye, salmon
and
even deep water loving trout, Snap Weights can do it all.
Tips
For Reading In-Line Planer Boards By
Mark Romanack
I had just completed setting out a 4th Off Shore Tackle Side Planer when
my youngest son Jake looked at me with a puzzled face and asked, Dad how
do
we tell when we have a fish? An elementary but important question, reading
or detecting strikes when using in-line boards isn't an easy concept to
explain or grasp.
I
thought for a moment and then answered, "When a fish grabs our lure,
the board will jerk backwards in the water." The look on Jake's face
suggested he wasn't sure exactly what to expect next. I went on to
explain
that the weight of the fish pulling and fighting against the board causes
it
to jerk or pull backwards in the water. By watching and comparing to the
other boards, it's pretty easy to tell if a board has hooked a fish.
The
truth is it's pretty easy to tell when a fish is hooked on the
Side Planer board. Pretty easy so long as the fish is good sized, you're
trolling straight downwind, the boat doesn't turn and you happen to see
the
strike the moment it occurs!
Unfortunately
there are times when even a seasoned troller can drag fish
he didn't know was hooked. Small fish are tougher to detect because they
aren't big enough to cause the board to react violently or in an obvious
way. Quartering into the waves (instead of trolling straight with or into
the wind) also makes it more difficult to read in-line boards. When a
fishing boat quarters the waves it doesn't enjoy a steady and smooth
course.
The wind turns the boat, forcing the driver to constantly adjust his
course.
The boat moves forward but is actually swinging back and forth along an
imaginary centerline. The trailing boards follow the boat, swinging back
and forth instead of following a steady and straight course.
Each
time the boat turns toward one of the boards the line goes a
little slack and the board sags backward slightly, then recovers when the
boat turns again and the line pulls tight.
If
a fish is hooked while the boat is in a subtle turn there's just
enough slack in the line to prevent the board from showing obvious
movement.
The weight of the hooked fish does cause the board to sag backward, but
it's easy to miss even if you¹re an experienced troller. Eventually
the boat will pull straight or turn the opposite direction. When this
happens the board with a fish attached always seems to be lagging a little
behind the others. The rule of thumb is to always check lines that are
sagging a little or don¹t look just right. It only takes a minute or two
to
check the line and be sure you¹re not dragging a small fish or a fouled
lure.
Turns
are the toughest place to detect strikes on in-line boards. During
a turn the outside lines speed up while at the same time the inside lines
stall and slow down. Of course the trailing lures do the same thing,
helping
to trigger strikes.
If
a fish is hooked on an outside line, it is usually pretty easy to
detect because the board is moving in a steady path. It's the inside
boards
that are stalling that are tougher to read. Often a fish hooked on the
inside lines isn't apparent until the boat straightens out again. A fish
hooked on the inside lines often prevents the board from pulling back out
to
the side properly once the boat straightens out. Again, a board that
always
seems to be lagging behind is a tip off that something is wrong.
HOW
FAR DO I RUN MY BOARDS OUT TO THE SIDE?
It's
also easier to detect strikes when the boards are fished within
50-75 feet of the boat. When the boards are let out 100 or more feet away
from the boat, slight changes in course cause the boards to momentarily
stall and start, making it more difficult to tell if a fish has been
hooked.
This is especially true if the target fish are small.
Running
the boards a little closer to the boat makes subtle changes in
how the board is running more obvious. However, there's obviously a point
of
diminishing return. Fishing the boards too close to the boat defeats the
purpose of using boards in the first place. Running the boards 50-75 feet
out is a good rule of thumb when you're first learning how to read planer
boards. Once you get a little experience, I'd recommend running the
boards
out 75-100 feet. Many of the top walleye pros run their boards as far as
150
out to the side.
TROLL
WITH THE WIND
Trolling
with the wind makes it easier to read the boards, no matter how
far out to the side they are fished. In a following sea the boards run
smoothly and in a predictable manner. When trolling into the waves, the
boards jump around, leap out of the waves and otherwise hop all over the
place. While this board action can trigger strikes, reading these strikes
is
tricky for even those anglers who have considerable experience fishing
in-line boards.
LOW
STRETCH LINES HELP
Using
low stretch lines such as the super braids or fused lines makes it
very easy to detect hooked fish on in-line boards. Because the line
doesn't
stretch, anything that touches the lure causes the board to react
accordingly. When fishing low stretch lines I recommend using the new Off
Shore Tackle OR-18 Snapper Release that's designed to hold this thin and
slippery
surfaced line securely. Snapper releases are sold individually and can be
installed on most in-line boards.
MATCHING
UP LURES
Certain
lures pull harder in the water than others. Matching up lures
that generate similar drag or pulling resistance allows the board to
run in a more uniform manner that¹s easier to monitor. Avoid running a
deep
diving lure with lots of drag next to a shallow diving lure with little
drag.
TATTLE
FLAGS
No
matter how good you get at reading in-line boards, there will be
times when a small fish or fouled lure is dragged around. The ultimate
solution to this problem is the OR-12TF Tattle Flag produced by Off Shore
Tackle.
The
Tattle Flag is a spring loaded flag kit that allows the flag to fold
down when a fish is hooked. The Tattle Flag is so sensitive even a
crankbait
that¹s fouled with a piece of weed causes the flag to fold to half mast.
Never again will you drag a small fish or fouled lures with the Tattle
Flag.
Designed
as an after market kit, a Tattle Flag can be installed on an
OR-12 Side-Planer board in about five minutes. The kit comes complete with
a
flag, spring/linkage assembly, two OR-16 Snap Weight clips and the
necessary
hardware.
Reading
the boards is part science and part intuition. If for any reason
you suspect something is wrong with the way a board is running, take a few
seconds and check that line. The bait could have become fouled on
something
floating in the water, picked up a weed or a cluster of zebra mussels. It¹s
better to check immediately than to drag something around, twisting the
line
in the process.
Trolling
The Big Easy Spotted Sea Trout Of Lake Ponchartrain
By Captain Dee Geoghegan
Fishing
in Lake Pontchartrain is like standing on the corner at Mardi Gras, you
never know what you will catch. Fresh and saltwater species are abundant
in Lake Pontchartrain year round; however, the spotted sea trout or
speckled trout is a highly sought after prize.
A trip to Lake
Pontchartrain, which is as close as
15 minutes from downtown New Orleans, can fill an ice chest with speckle
trout, redfish, flounder, drum, and many other species of fish. As a year
round fishery, the lake is an anglers dream. It truly lives up to the
Louisiana title of sportsman paradise.
Trolling is a year round tactic used by many anglers
in the area. Yet, very few anglers incorporate in-line planer boards into
their fishing tactics. Since I started using the Off Shore Tackle Side
Planers, I have increased my catches of trout. Even though I get some
strange stares from local anglers, few can argue with my results. I was
surprised how easy the board was to use.
Lake Pontchartrain is a very shallow body of water.
The average depth of the lake is about twelve feet. With strong tidal
movement caused by wind and the link to the Gulf of Mexico, bridges such
as the Causeway and I 10 Twin Spans are frequent haunts of big sea trout.
The Causeway is a 24 mile two bridge connection between New Orleans and
it’s north shore neighbor. An approximate six miles wide neck of the
eastern end of Lake Pontchartrain is traversed by the I 10 interstate
bridge, Highway 11 bridge, and a train trestle. The bridges have produced
numerous state record trout in the last few years.
Trolling in Louisiana has never been a complex
event. An angler uses his outboard to idle next to a bridge using one or
two rods with a 3/8 ounce jig head with a plastic tail or other type of
lure. Although this is productive, planer boards increase the number of
rods in the water and the area of water covered. When I troll the train
trestle or Southshore, I often fish with four rods at one time. Since I am
the only person in the boat, this would be a difficult task without the
planer boards.
Fishing in the lake is a year round event. In the
winter, trolling is at its best when trout move to the deep water near the
area’s bridges. In the spring, usually around April Fools Day, the trout
return to the Seabrook area. In the summer, trout along with a dozen other
species of fish congregate at the bridges and other structure in the lake.
By fall and the World Series, trout show up along the Southshore.
My main lure for trolling for big speckled trout is a
lure made by V and G Lures called a Deadly Dudley. It is sold as a
straight tail or terror tail model. Both are excellent for imitating
shrimp, croakers, or other baitfish targeted by the speckle trout. The
terror tail has a design that causes the lure to wobble much like a
crankbait. The extra vibration really produces when it comes to trolling.
It has also been used for walleye and other species such as bass.
About the time of the Super Bowl, state record trout
frequent the bridges along the I 10 area of the lake between Slidell and
New Orleans. Trolling is the best way to cover the miles of water along
the I 10, Highway 11, and trestles. Use various size jig heads from ¼ to
½ ounces. Add Deadly Dudley’s in various colors and styles. If you add
a right and left Side Planer, four rods can be used instead of two. By
paralleling the bridges, you can add trout to your trip by adding these
simple to use in-line boards.
After casting the bait perpendicular to the boat,
the angler simple reaches up and clips the board on the line. Place the
board in the water and let out about 20 yards of line. The board carries
the bait about 20 feet away from your boat. After a fish is hooked, the
board and fish are reeled to the boat. Once the board is within reach,
unclip the board and continue to fight the fish. Planer boards will add
fish to your ice chest by increasing the area you cover and the number of
lures in the water.
Very few people in Louisiana use planer boards. I
was surprised how productive the boards made my fishing. I was even
impressed how easy the boards were to use. From the first cast and
placement of the board to the landing of the fish, the Off Shore Tackle
Side Planer was simple, fun, and flawless in its performance.
Captain Dee Geoghegan can be reached at
1-888-773-2536 or by visiting his website at www.fishingguideservices.com
.